GET IN TOUCH
Phone : 01134361236
Email : email@example.com
HOW TO FIND US
Unit A2 Sunshine Mills,
Leeds, LS12 3HT
Mon-Fri 09:00 – 16:00
Sat 09:00 – 12:00
SOLL 2K PRIMER GREY 3L HS 5:1
Acrylic Primer/Filler 2.5ltr & Hardener 0.5ltr
1x Primer 2.5ltr
1x Hardener 0.5ltr
Two-component primer / filler on the basis of acrylic resin. It has excellent filling properties as well as good adhesion to the puttied surface. It is recommended to use as a basis for one and two-component acrylic topcoats, solvent based or water-borne paints. Destined for manual/machine treatment with sanding dry and wet materials. This primer is particularly suitable for car bodies, metal or steel structures to protect from corrosion. This is a perfect product for polyester-glass surfaces, previously repaired with polyester fillers and hard plastics, used in automotive industry.
Chemical base: Acrylic resin
Density: 1,48 – 1,59 g/cm?Efficiency: 5 m2/l
Preparation: The surface must be cleaned, dry, degreased and matted.
Mixing ratio: 5:1 by volume
Filler 100 % vol.
Hardener 20 % vol.
Add thinner for acrylic products 20 – 25 % vol. Mix thoroughly.
Spray viscosity: 25 – 30 sec. at + 20 ?C, Ford cup 4 mm
Pot life: Up to 2h at + 20 ?C
Spray gun Nozzle diameter: 1,6 – 1,8 mm
Flash – off: 8 – 10 min. at + 20 ?C
Application: 2 – 3 normal coats
Drying thickness: 60 – 80 ?m
Drying time: 30 min. at +60 ?C / 5 – 7 h at + 20 ?C
Infrared drying: Short and medium wave: 7 – 15 min.
Sanding: Sand dry with P320 – P400 or wet with P800 – P1200.
For the Next Day delivery please place an order before 12 noon. If the order placed after 12 noon we can?t guarantee next day delivery.
Additional Postage Charges May Apply For The Following Locations: Channel Isl ands, Ireland, Northern Island, Scottish Isles & Scottish Highlands. Please contact for the quote
WE ARE HAPPY TO HEAR THAT YOU FULLY ENJOYED OUR SERVICES