1x Primer 0.75ltr
1x Hardener 0.15ltr
Two-component primer / filler on the basis of acrylic resin. It has excellent filling properties as well as good adhesion to the puttied surface. It is recommended to use as a basis for one and two-component acrylic topcoats, solvent based or water-borne paints. Destined for manual/machine treatment with sanding dry and wet materials. This primer is particularly suitable for car bodies, metal or steel structures to protect from corrosion. This is a perfect product for polyester-glass surfaces, previously repaired with polyester fillers and hard plastics, used in automotive industry.
Chemical base: Acrylic resin
Density: 1,48 – 1,59 g/cm?Efficiency: 5 m2/l
Preparation: The surface must be cleaned, dry, degreased and matted.
Mixing ratio: 5:1 by volume
Filler 100 % vol.
Hardener 20 % vol.
Add thinner for acrylic products 20 – 25 % vol. Mix thoroughly.
Spray viscosity: 25 – 30 sec. at + 20 ?C, Ford cup 4 mm
Pot life: Up to 2h at + 20 ?C
Spray gun Nozzle diameter: 1,6 – 1,8 mm
Flash – off: 8 – 10 min. at + 20C
Application: 2 – 3 normal coats
Drying thickness: 60 – 80 ?m
Drying time: 30 min. at +60 ?C / 5 – 7 h at + 20 ?C
Infrared drying: Short and medium wave: 7 – 15 min.
Sanding: Sand dry with P320 – P400 or wet with P800 – P1200.