GET IN TOUCH
Phone : 01134361236
Email : email@example.com
HOW TO FIND US
Unit A2 Sunshine Mills,
Leeds, LS12 3HT
Mon-Fri 09:00 – 16:00
Sat 09:00 – 12:00
Putty 0.25kg + hardener
Two-component universal filler based on polyester resin. Easy to use, flexible, excellent adhesion to both the primed and the unprimed metal surfaces. It is characterised by very good adherence to various surfaces, for example, steel, aluminium, glass fiber reinforced plastic (GFK) and wood.Exhibits very good adhesion to metal. Easy to mixing and apply.Soft sanding properties.
The product has very good adhesion to various substrates. It can be applied over:
- Bare steel and aluminium after flatting and degreasing;
- Zinc coated, galvanized steel after flatting and degreasing;
- Sanded glass fibre (GFK/GRP), polyester putties, works primers and existing coatings in good condition;
- Wood substrate after flatting and degreasing.
Caution: Do not apply the putty directly on the reactive primers, 1-pack acrylic and nitrocellulose products.
Chemical base: Polyester resin
Density: 1,91 kg/l
Mixing ratio: 100 parts of putty : 2 parts of hardener (by weight).
Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.
Pot life: 5 – 6 min. at 20C.
Hardening time: 16 – 18 minutes at + 20C.
Temperature below 20C significantly increases the hardening time.
Sanding: Coarse sanding (dry): Sanding starts with sanding paper P80-120 and finishes with sanding paper P120- 240.