SOLL FINE 2-pack finishing polyester putty for car repairs.
Excellent adhesion to substrate
Easy to apply
Very smooth surface once sanded
Putty 0.25kg and Red Hardener
The product has very good adhesion to various substrates. It can be applied over:
Bare steel and aluminium after flatting and degreasing.
Zinc coated, galvanized steel after flatting and degreasing.
Sanded glass fibre (GFK/GRP), polyester putties, works primers and existing coatings in good condition.
Wood substrate after flatting and degreasing.
We recommend sandpaper with gradations: P80 – P120.
Caution: Do not apply the putty directly on the reactive primers, 1-pack acrylic and nitrocellulose products.
Mixing ratio: 100 parts of putty : 2 parts of hardener (by weight)
Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.
Layer thickness: Putty can be applied in several thick coats. After each of them the product should dry through. Sand the coating before application of next coat.
Pot life: It is necessary to use a putty in 5 – 6 min. at 20C.
Hardening time: 18 – 20 minutes at + 20C
Temperature below 20C significantly increases the hardening time.
Sanding: Coarse sanding (dry): P80 – P180. Finishing sanding (dry): P120 – P240.
Further works: Polyester putties can be over coated with:
2-pack polyester spraying fillers
2-pack wash primers
2-pack acryl fillers
2-pack epoxy fillers.