Unit A2 Sunshine Mills,
Leeds, LS12 3HT
Phone : + 44 1134361236
Email : email@example.com
MON-FRI 09:00 – 16:00
SAT 09:00 – 12:00
Two component polyester putty reinforced with special-cut fibreglass. Recommended for filling and reinforcing the surfaces affected by corrosion after cleaning them first. It is characterised by a very high adhesion to any type of surface and mechanical strength. It is easy to apply and process.
Putty 0.2kg + hardener
Apply to the surface in thin layers within 4-5 minutes / 20C from preparation, at the temperature of at least 10C.
Mixing ratio: Mix thoroughly 100 parts by weight of the filler with 2-3 parts by weight of the curing agent to obtain uniform colour.
Using too much hardener can result in discolouration of the top coat.
– galvanized steel,
– polyester laminates,
– old paint coatings.
Do not apply directly to the reactive primers, one-component acrylic and nitrocellulose products.
Drying time: 20-30 minutes / 20C. Higher temperatures accelerate the curing process.
Sanding: Perform preliminary grinding with the sandpaper P80-P120, finishing work should be done with the sandpaper P120 – P240.
|Country/Region of Manufacture|