Putty 1.7kg + hardener
SOLL BLACK CARBON is a high quality carbon fiber reinforced polyester putty for car repairs. It is recommended for filling large dents and holes in vehicles, caravans and trailers.
Exhibit superb adhesion to metal and plastic.
Large hardness with high elasticity.
Extremely short hardening time.
Very good sanding properties.
The product has very good adhesion to various substrates. It can be applied over:
Bare steel and aluminium after flatting and degreasing.
Zinc coated, galvanised steel after flatting and degreasing.
Sanded glass fibre (GFK/GRP), polyester putties, works primers and existing coatings in good condition.
Wood substrate after flatting and degreasing.
Mixing ratio: 100 parts of putty : 2 parts of hardener (by weight).
Stir thoroughly until achieving homogenous paste. Be careful not to create air inclusions.
Layer thickness: Putty can be applied in several thick coats. After each of them the product should dry through. Sand the coating before application of next coat.
Pot life: It is necessary to use a putty in 3 – 4 min. at 20C.
Hardening time: 14 – 16 minutes at + 20C.
Temperature below 20C significantly increases the hardening time.
Sanding: Coarse sanding (dry): P80 – P180.
Further works: Polyester putties can be over coated with:
2-pack polyester putties.
2-pack polyester spraying fillers.