Unit A2 Sunshine Mills,
Leeds, LS12 3HT
Phone : + 44 1134361236
Email : email@example.com
MON-FRI 09:00 – 16:00
SAT 09:00 – 12:00
Putty 0.2kg + hardener
Polyester filler putty containing aluminium dust, designed to fill large and small irregularities. It is characterized by high mechanical strength, excellent resistance to high temperatures and flexibility. Easy to apply and process with coarse and fine sandpaper, easy to grind at the borders of the filled area.
- galvanized steel,
- polyester laminates,
- old paint coatings.
Do not apply directly to the reactive primers, one-component acrylic and nitrocellulose products.
Apply to the surface in thin layers not thicker than 5 mm within 4-5 minutes / 20C from preparation, at the temperature of at least 10C.
Surface preparation: Degrease, abrade and clear the surface. Degrease again and dry thoroughly.
Putty preparation: Mix thoroughly 100 parts by weight of the filler with 2-3 parts by weight of the curing agent to obtain uniform colour. Using too much hardener can result in discolouration of the top coat.
Drying time: 20-30 minutes / 20C. Higher temperatures accelerate the curing process.
Hardening the surface should be sanded before applying the next coat.
Grinding: Perform preliminary grinding with the sandpaper P80-P120, finishing work should be done with the sandpaper P180 – P240.
The following may be applied on the putty:
- polyester finishing putty,
- polyester spray putty,
- acrylic primers.