Spray putty equalises and closes areas of unevenness, scratches and marks on the car; ensures a pore-free surface. Clean and sand down surface, remove any rust. Apply a first coat of anti-corrosion primer. Shake can well for 2 minutes. Test spray to check compatibility and colour tone. Spraying distance approx. 25 cm. When filler is thoroughly dry, sand down with a wet sanding paper P600. Do not spray on surfaces coated with synthetic resins as the paint may lift.
High level of solid matter.
Good drying properties.
For 2 cross-coats: approx. 40 – 50um.
Dust dry: after 5 – 10 minutes.
Fast to handling: after 30 – 40 min.
Dry hard: after 24 hours.
CAN BE PAINTED OVER
With itself: at any time.
1. Anti-corrosion primer or zinc chromate primer.
2. Filler spray.
3. Top coat.