SOLL ETCH PRIMER Anti Corrosion Filler Aerosol 500ml Grey

SOLL ETCH-FILLER HB SPRAY is an outstanding one-component self-etching filler with active protection against corrosion. Excellent adhesion and high filling power. The high material output not only guarantees a high build coating process it also ensures a fast and efficient work rate. The high depth penetration of the spray jet ensures that even difficult to reach areas can be coated. Professional quality! Adhesive on iron, steel, zinc and by appropriate pretreatment on aluminium as well as all conventional re-coatable plastics used in the automotive industry (spray to test the recoat ability). High protection against corrosion!

APPLICATION

Substrate:
Iron, steel, zinc and aluminium
Do not process on thermoplastic substrates.

Pre-treatment / Cleansing:
Pre-cleansing with silicone remover.

Characteristics:
Time saving by easier application Fast drying
Excellent sandability
High filling power
Resistant to silicone remover
Outstanding adhesion
Re-coatable with all commercial solvent and water based 1K and 2K top coats
High protection against corrosion

Substrate:

Iron, steel, zinc and aluminium
Do not process on thermoplastic substrates.

Pre-treatment / Cleansing: Pre-cleansing with silicone remover.

Characteristics:

Time saving by easier application Fast drying
Excellent sandability
High filling power
Resistant to silicone remover
Outstanding adhesion
Re-coatable with all commercial solvent and water based 1K and 2K top coats
High protection against corrosion

Preparation: Shake can vigorously until the mixing balls move freely!

Application: Spray to test – Spraying distance approx. 20 – 50 cm 2 – 3 applications. Dry film thickness 50 – 80um.

Flash-off: 3 – 5 min. between each coating

After use: Turn can upside down and spray until the valve is clean, this prevents the valve from clogging up.

Drying times: Dust dry: after approx. 5 min. /Set to touch: after approx. 10 min. /Re-coatable: after approx. 30 min.Sandable: after approx. 30 min.