Chromate-free 1K repair filler applicable on slightly sanded 2K old paintworks, shop primers and directly on steel, aluminium, galvanised substrates and several plastics (e.g. hard PVC, Hart-PVC, PPO/PA, ABS, ABS/PC, PC/PBT).
1K filler to insulate sand through areas high filling capacity
Good vertical stability
Recoatable with all common solvent and water-based basecoats as well as with 1K and 2K topcoats
Application method Spray to test, spray distance approx. 10 – 15 cm apply 2 coats. Dry firm thickness 60 μm.
Flash-off time 5 – 10 min. in between coats
Dust dry: after approx. 6 min.
Set to touch: after approx. 40 min.
Sandable: after approx. 1 h.
Not suitable for plastic substrates made of PE, PP, PP-Blends (e.g. PP/EPDM), polystyrene (e.g. Styropor®), thermoplastic coatings.
VOC Regulation :
EU limit value for this product (category B/e): 840 g/l This product contains max. 840 g/l of VOC.
Before use, remove loose rust if necessary, sand substrates slightly with sanding paper P 180 – P 240; clean and degreaseshake aerosol until the metal balls inside the can rattle, then shake vigorously for another 2 minutes. Spray test. After use hold the can upside-down and spray until the valve is empty in order to avoid the paint drying up in the valve. Processing conditions are from +10°C up to 80% relative air humidity.