Monofil Vario+ Adhesion 500 ml

MONOFIL VARIO+ Adhesion Promoter is a completely colourless multipurpose plastic primer for applications on all commonly used plastics in the automotive industry. Thanks to its special composition it provides also adhesion on further challenging substrates without any preliminary sanding. The product is extremely time-saving because of its fast drying and overcoatability as well as its application without preliminary sanding.

MONOFIL VARIO+ Adhesion Promoter is colourless and UV-resistant and can therefore be overcoated with MONOFIL VARIO+ clearcoats.

PRODUCT BENEFITS

Excellent adhesion
Fast drying
Colourless
Highly flexible

Application method 1 light coat, approx. 1 – 2 -μm

Drying time

air drying: 10 min at 20 °C
recoatable: after 10 min at 20 °C

VOC Regulation :

EU limit value for the product (cat. B/e): 840 g/l (2007) This product contains max. < 840 g/l of VOC.

Processing instructions:

Clean surface thoroughly and sand slightly if necessary. The area to be repaired must be dry and free from grease and dust. Clean the substrate with silicone remover. The substrate must be free from release agents. It is recommended to reheat the objects to be painted. Shake can vigorously for 2 minutes! Spray to test. After use hold the can upside-down and spray until the valve is empty in order to avoid the paint drying up in the valve. Processing conditions are from +10°C and up to 80% relative air humidity.