SOLL TEXTURED BUMPER PAINT for PLASTIC TRIMS TOP COAT 400ml Aerosol Black

Texture spray is particularly suited for refurbishing car body parts made of plastic. Easy to process, good adhesion properties, very fast drying, resistant to scratching. Processing: sand the damaged area, if necessary use a filler and then apply a thin coat of plastic bonding agent. Shake the can for at least 2 minutes. Test spray to check compatibility and colour tone. Apply 2 – 3 spray coats allowing 5-10 minutes between each coat. Can be painted over using all standard 1K and 2K top coats after around 15 minutes at 20C. Do not spray on surfaces coated with synthetic resins as the paint may lift.

PRODUCT BENEFITS
Easy to process.
Good adhesion.
Economic.
Fast drying.
Scratch resistant.

SPRAYING COATING
2 cross-coats: approx. 40 – 50um dry film thickness

DRYING TIMES

Dust dry: after approx. 30 min.
Fast to handling: after approx. 1 hour Dry hard: after approx. 24 hours

CAN BE PAINTED OVER
With itself: after 15 minutes.

PAINT STRUCTURE

Spray directly onto the primer coated surface.