Monofil Vario+ Satin Clearcoat 500 ml

MONOFIL VARIO+ Satin Clearcoat is a high-quality, fast drying finish for solvent or water-based basecoats.

PRODUCT BENEFITS

Excellent weather resistance, scratch and shock-resistant
Light fast and non yellowing
High surface hardness and at the same time
Good flexibility good adhesion
Good flow

Product Details

Colour Clear
Gloss level Satin
Application method Spray to test, spray distance approx. 10 – 15 cm 2 – 3 coats. Dry firm thickness between 30 – 40 μm.
Flash-off time 5 – 10 min. in between coats

Drying time

Dust dry: 10 min. / 20°C
Set to touch: 20 min. / 20°C
Ready for assembly: 12 h / 20°C

VOC Regulation :

EU limit value for this product (category B/e): 840 g/l This product contains max. 840 g/l of VOC.

Processing instructions:

Before use, pre-clean with silicone remover. Shake can vigorously before use. After use hold the can upside-down and spray until the valve is empty in order to avoid the paint drying up in the valve. Processing conditions are from +10°C and up to 80% relative air humidity.