MONOFIL VARIO+ Matt Clearcoat is a high-quality, fast drying finish for solvent or water-based basecoats.
Excellent weather resistance, scratch and shock-resistant
Light fast and non yellowing
High surface hardness and at the same time
Good flexibility good adhesion
Gloss level Matt
Application method Spray to test, spray distance approx. 10 – 15 cm 2 – 3 coats. Dry firm thickness between 30 – 40 μm.
Flash-off time 5 – 10 min. in between coats
dust dry: 10 min. / 20°C
set to touch: 20 min. / 20°C
ready for assembly: 12 h / 20°C
VOC Regulation :
EU limit value for this product (category B/e): 840 g/l This product contains max. 840 g/l of VOC.
Before use, pre-clean with silicone remover. Shake can vigorously before use. After use hold the can upside-down and spray until the valve is empty in order to avoid the paint drying up in the valve. Processing conditions are from +10°C and up to 80% relative air humidity.