Unit A2 Sunshine Mills,
Leeds, LS12 3HT
Phone : + 44 1134361236
Email : firstname.lastname@example.org
MON-FRI 09:00 – 16:00
SAT 09:00 – 12:00
SOLL ACRYLIC CLEAR COAT UHS 7.5LTR KIT
Lacquer 5ltr & Hardener UHS10 FAST 2.5ltr
1x Lacquer 5ltr
1x Hardener UHS 10 2.5ltr Fast
This is the highest quality transparent two-component acrylic clear coat with high content of solids. It provides a hard, high-gloss, scratch-resistant surface and excellent appearance. Since it is sufficient to spray 1,5 – 2 layers, spread evenly and dries quickly
Mixing ratio: 2:1 by volume
Hardener: 2K- HS Acrylic hardener SOLL UHS 10 (fast);
Dilution: Without thinner
Spraying viscosity 18 – 22 seconds at 20 ?C.
Spraying pressure: 2 – 2,5 bar
Spraying nozzle:1,3 – 1,4 mm
Evaporation time: between layers approx 10min before baking 10-15min
Drying time: a) 6-8 h at 20C; b) 25-30 min at 60C
Pot life: 1 hour and 30 minutes at 20C
Sanding: Usually polishing is unnecessary, as the clearcoat SOLL UHS gives the surface a perfect look immediately after having been used. However, if some dirt inclusions appear, one recommends removing them wet, using sanding paper P1500 – P2000 and then polishing the surface with abrasive compound.
For the Next Day delivery please place an order before 12 noon. If the order placed after 12 noon we can’t guarantee next day delivery.
Additional Postage Charges May Apply For The Following Locations: Channel Isl ands, Ireland, Northern Island, Scottish Isles & Scottish Highlands. Please contact for the quote
WE ARE HAPPY TO HEAR THAT YOU FULLY ENJOYED OUR SERVICES