Unit A2 Sunshine Mills,
Leeds, LS12 3HT
Phone : + 44 1134361236
Email : firstname.lastname@example.org
MON-FRI 09:00 – 16:00
SAT 09:00 – 12:00
Putty 1.5kg + hardener
Two component polyester putty reinforced with special-cut fibreglass. Recommended for filling and reinforcing the surfaces affected by corrosion after cleaning them first. It is characterised by a very high adhesion to any type of surface and mechanical strength. It is easy to apply and process.
Apply to the surface in thin layers within 4-5 minutes / 20 ?C from preparation, at the temperature of at least 10 ?C.
Mixing ratio: Mix thoroughly 100 parts by weight of the filler with 2-3 parts by weight of the curing agent to obtain uniform colour.
Using too much hardener can result in discolouration of the top coat.
? galvanized steel,
? polyester laminates,
? old paint coatings.
Do not apply directly to the reactive primers, one-component acrylic and nitrocellulose products.
Drying time: 20-30 minutes / 20?C. Higher temperatures accelerate the curing process.
Sanding: Perform preliminary grinding with the sandpaper P80-P120, finishing work should be done with the sandpaper P120 – P240.
For the Next Day delivery please place an order before 12 noon. If the order placed after 12 noon we can?t guarantee next day delivery.
Additional Postage Charges May Apply For The Following Locations: Channel Islands, Ireland, Northern Island, Scottish Isles & Scottish Highlands. Please contact for the quote.
WE ARE HAPPY TO HEAR THAT YOU FULLY ENJOYED OUR SERVICES