ARS FIBREGLASS BODY FILLER PUTTY 0.25kg Fibre Glass Reinforced

Two component polyester putty reinforced with special-cut fibreglass. Recommended for filling and reinforcing the surfaces affected by corrosion after cleaning them first. It is characterised by a very high adhesion to any type of surface and mechanical strength. It is easy to apply and process.

APPLICATION

Apply to the surface in thin layers within 4-5 minutes / 20C from preparation, at the temperature of at least 10C.

Mixing ratio: Mix thoroughly 100 parts by weight of the filler with 2-3 parts by weight of the curing agent to obtain uniform colour.

Using too much hardener can result in discolouration of the top coat.

Can be used on following substrates:

galvanized steel,
steel,
polyester laminates,
aluminium
old paint coatings.

Do not apply directly to the reactive primers, one-component acrylic and nitrocellulose products.

Drying time: 20-30 minutes / 20C. Higher temperatures accelerate the curing process.

Sanding: Perform preliminary grinding with the sandpaper P80-P120, finishing work should be done with the sandpaper P120 – P240.