Monofil SMART+ Primer is a fast drying aerosol acrylic primer filler for the repair/refinish of metallic surfaces. Can also be used as a weld-through primer for spot welding operations. Sprays to give a tough acrylic primer coating. It is compatible for spraying over acrylic and cellulose, but not alkyd as wrinkling may occur. It can be overcoated with cellulose, acrylic, alkyd, P/U-alkyd and epoxy.
Enhanced covering power
Excellent adhesion to metals and rigid plastics
Professional standard application from the adjustable fan spray nozzle
Application method Apply several light coats from a distance of 20 – 25cm. Apply as many coats as necessary to achieve total and even coverage.
Flash-off time 15 min. in between coats
Sandable after approx. 2 h. Allow at least 24 hours to harden.
Not to use on surfaces treated with primers of unknown composition, without first ascertaining suitability of use.
VOC Regulation :
Compliant with EU Directive 2004/42/CE.
Prepare the area to be treated, ensuring freedom from dust, grime, traffic film, greases, oils etc. Following preparation lightly abrade surface, remove any dust with a solvent wipe, white spirit, thinners or a proprietary panel wipe and allowed to dry. Mask area to prevent overspray. Shake the can thoroughly for at least two minutes. Repeat shaking at regular intervals during use. On completion of use, invert can and depress actuator for a few seconds to prevent nozzle blockage.